20Gauge
TB Fanatic
Yep... they appear near bottom. Rather close enough so not to worry about.
I have been buying 100 rounds or so each time I get to the store. Still don't have near enough, but it does help.
Damn you for mentioning them! 
Fortunately, I have no funding at this time, having put a deposit on a Ghost Gunner Gen2 milling machine (due for delivery in Q4 of this year).
Fortunately, I have no funding at this time, having put a deposit on a Ghost Gunner Gen2 milling machine (due for delivery in Q4 of this year).
1911user
Veteran Member
The $500 AR-10 is possible again. $300 for a basic upper assembly and $180 for the basic lower assembly, both with free shipping...
That leaves $20 for the FFL transfer on the lower assembly.
A better option IMHO would be to spend another $100-$120 on the upper assembly and get one with a free-floated rail. Of course, then it is no longer a $500 AR-10.
AR10 lowers: https://palmettostatearmory.com/ar-10/pa10-lowers.html
AR10 uppers: https://palmettostatearmory.com/ar-10/ar-10-upper-assemblies.html
That leaves $20 for the FFL transfer on the lower assembly.
A better option IMHO would be to spend another $100-$120 on the upper assembly and get one with a free-floated rail. Of course, then it is no longer a $500 AR-10.
AR10 lowers: https://palmettostatearmory.com/ar-10/pa10-lowers.html
AR10 uppers: https://palmettostatearmory.com/ar-10/ar-10-upper-assemblies.html
Damn you for mentioning them!
I'll make you a deal on a Bridgeport...you can cut 'em manually.
Let's see what yer made of.
Heh - I'm worthless dude (but then, that's why I hate you so). But perhaps the GG2 can be independently programmed. Where does that "hole" go again...?
Jackpine Savage
Veteran Member
I've got all my parts, just have to get started.
Just got this from Brownells this morning:
https://www.brownells.com/guntech/how-to-build-a-polymer80-for-a-glock-174-pistol/
Yeah
I haven't attempted one either.
It would be terribly time consuming to plot out everything manually.
Hours and hours, I'm guessing.
I haven't attempted one either.
It would be terribly time consuming to plot out everything manually.
Hours and hours, I'm guessing.
20Gauge
TB Fanatic
Damn you for mentioning them!
Now I'm jealous!!!
The Gen2 will not only make AR15 lowers, but also AR10 lowers, and Glock and 1911 frames. And more are planned via software update in the future.
Neener neener....
Neener neener....
Are the GG recipes dependent on 80% parts or can you start with a chunk o steel?
I have no idea. But I know nothing about programming or using a CNC milling machine.
You might get (whatever language they use)-For Dummies...
and put it by the john.
WAG, their programs are plug n play, you just need some index/zero points.
Might get a Machining For Dummies too.
and put it by the john.
WAG, their programs are plug n play, you just need some index/zero points.
Might get a Machining For Dummies too.
Or, you could bring equipment and TEACH ME, face-to-face. (I’d actually love that.)
HEH
I'm just a hack at it.
Thinwater is who I would dearly love to apprentice under.
I'm just a hack at it.
Thinwater is who I would dearly love to apprentice under.