Dodge 318 fuel injectors

[Garryowen]

Our old Dodge van has sat for a couple years and I tried to get it started today. It will take right of with a shot of ether in the intake, but dies immediately. No gas coming out of the injectors. There is electricity to the wires going to the injectors and good gas pressure in the line to the injectors. Any insights from those of you with experience with Dodge fuel injection will be appreciated.

TIA

Garryowen

 

[twohawlks]

The injectors are pulsed by the computer .there should be power at the injectors,which you say you have ,and be grouned at the computer. To test for pulse you can use a noid light or a 12v test light . Unplug the conector and plug in the noid light, have someone crank the engine over and watch the light it should flash, if it does the problem is in the injector, if it does not flash it is a wiring or computer problem. To use a test light unplug the conector and conect the test light to the 2 terminals in the conector,crank engine and watch the light .